CE Category I

Simple Design - for minimal risks only. Suitable only for low risk applications where hazards can be identified by the wearer in time to deal with them.

 

CE Category II

Intermediate Design - reversible risks. Products are type examined by an approved body where they examine the manufacturers’ technical specifications and conduct tests for the relevant standards to ascertain their conformity and/or performance.

 

CE Category III

Potentially fatal risks, for example in activities where toxic or highly corrosive chemicals are handled. The glove must meet the standards set out for this category. Its compliance is not only certified but also checked by a notified body, the reference number of which is located below the CE logo.

 

BS EN 1073-2:2002

Protective clothing against radioactive contamination. Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination

 

BS IEC 1149:1995

Guide for safe handling and operation of mobile radio equipment

 

BS EN 1149-1:1996

Protective clothing. Electrostatic properties. Surface resistivity

 

BS EN 1149-5:2008

Protective clothing. Electrostatic properties. Material performance and design requirements

 

ISO 11429

Ergonomics. System of auditory and visual danger and information signals

 

BS EN 13034:2005+A1:2009

Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)

 

BS EN ISO 13982-1:2004+A1:2010

Protective clothing for use against solid particulates. Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)

 

BS EN 14123:2007

Foodstuffs. Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in hazelnuts, peanuts, pistachios, figs, and paprika powder. High performance liquid chromatographic method with post-column derivatisation and immunoaffinity column cleanup.

 

BS EN 14126:2003

Protective clothing. Performance requirements and tests methods for protective clothing against infective agents

 

BS ISO 14605:2013

Fine ceramics (advanced ceramics, advanced technical ceramics). Light source for testing semiconducting photocatalytic materials used under indoor lighting environment

 

BS ISO 16126:2014.

Space systems. Assessment of survivability of unmanned spacecraft against space debris and meteoroid impacts to ensure successful post-mission disposal

 

BS EN ISO 340:2013

Conveyor belts. Laboratory scale flammability characteristics.

 

BS EN 388:2003

Protective gloves against mechanical risks

 

BS EN ISO 407:2004

Small medical gas cylinders. Pin-index yoke-type valve connections

 

BS EN 4116:2004

Aerospace series. Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature) / 425°C

 

BS EN 455-2:2015

Medical gloves for single use.

 

BS EN 466-1:1995

Protective clothing. Protection against liquid chemicals. Performance requirements for chemical protective clothing with liquid-tight connections between different parts of the clothing (type 3 equipment)

 

BS EN ISO 11612:2015

Protective clothing. Clothing to protect against heat and flame. Minimum performance requirements

 

BS EN 61482-1-2:2014

Live working. Protective clothing against the thermal hazards of an electric arc. Test methods. Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test)

 

Type 6 Protective Clothing

Protects against hazardous limited splash of liquid chemicals and aerosol spray

 

Type 5 Protective Clothing

Protects against hazardous solid particles e.g. asbestos, anthrax powders etc.

 

Type 4 Protective Clothing

Protects against Heavy Shower of Liquid chemicals

 

BS EN 1081:1998

Resilient floor coverings. Determination of the electrical resistance

 

BS EN 1082-2:2000

Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives. Gloves and arm guards made of material other than chain mail

 

BS EN 1186-1:2002

Materials and articles in contact with foodstuffs. Plastics. Guide to the selection of conditions and test methods for overall migration

 

BS EN 12477:2001

Protective gloves for welders

 

BS ISO 1275:2006

Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors

 

BS EN 1276:2009

Chemical disinfectants and antiseptics . Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements

 

BS EN 12941:1998+A2:2008

Respiratory protective devices. Powered filtering devices incorporating a helmet or a hood. Requirements, testing, marking

 

PD ISO/TR 12942:2012

Compressors. Classification. Complementary information to ISO 5390

 

BS EN 136:1998

Respiratory protective devices. Full face masks. Requirements, testing, marking

 

BS EN 13697:2015

Chemical disinfectants and antiseptics. Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas. Test method and requirements without mechanical action

 

BS EN ISO 13704:2007

Petroleum, petrochemical and natural gas industries. Calculation of heater-tube thickness in petroleum refineries

 

BS ISO 13832:2013

Aerospace. Wire, aluminium alloy and copper-clad aluminium conductors. General performance requirements

 

BS EN ISO 13998:2003

Protective clothing. Aprons, trousers and vests protecting against cuts and stabs by hand knivesBS EN ISO 140-16:2006 Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurement of the sound reduction index improvement by additional lining

 

BS EN 141:2000

Respiratory protective devices. Gas filters and combined filters. Requirements, testing, marking

 

BS EN ISO 14116:2015

Protective clothing. Protection against flame. Limited flame spread materials, material assemblies and clothing

 

BS EN 143:2000

Respiratory protective devices. Particle filters. Requirements, testing, marking

 

BS EN 14328:2005

Protective clothing. Gloves and armguards protecting against cuts by powered knives. Requirements and test methods

 

BS EN 14387:2004+A1:2008

Respiratory protective devices. Gas filter(s) and combined filter(s). Requirements, testing, marking

 

BS EN 14476:2013+A1:2015

Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of virucidal activity in the medical area. Test method and requirements

 

BS EN ISO 148-1:2010

Metallic materials. Charpy pendulum impact test.

 

BS EN 149:2001+A1:2009

Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking

 

BS EN 166:2002

Personal eye protection.

 

BS EN 169:2002

Personal eye-protection. Filters for welding and related techniques. 

 

BS EN 170:2002

Personal eye-protection. Ultraviolet filters.

 

BS EN ISO 172:1998

Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia

 

BS EN 1731:2006

Personal eye protection. Mesh eye and face protectors

 

BS EN ISO 175:2010

Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals

 

BS EN 1811:2011+A1:2015

Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin

 

BS EN 319:1993

Particleboards and fibreboards. Determination of tensile strength perpendicular to the plane of the board

 

BS EN 342:2004

Protective clothing. Ensembles and garments for protection against cold

 

BS EN 343:2003+A1:2007

Protective clothing. Protection against rain

 

BS EN ISO 20345:2004

Personal protective equipment. Safety footwear

 

BS EN ISO 20347:2004

Personal protective equipment. Occupational footwear

 

BS EN 352-8:2008

Hearing protectors. Safety requirements and testing. Entertainment audio ear-muffs

 

BS EN 354:2010

Personal fall protection equipment. Lanyard

 

BS ISO 355:2007+A1:2012

Rolling bearings. Tapered roller bearings. Boundary dimensions and series designations

 

BS EN 358:2000

Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards

 

BS EN 360:1993

Personal protective equipment against falls from a height. Retractable type fall arresters

 

BS EN 361:2002

Personal protective equipment against falls from a height. Full body harnesses

 

BS EN 362:2004

Personal protective equipment against falls from a height.

 

BS EN 374-4:2013

Protective gloves against chemicals and micro-organisms. Determination of resistance to degradation by chemicals

 

BS EN 381-10:2002

Protective clothing for users of hand-held chain saws. Test method for upper body protectors

 

BS EN 397:2012+A1:2012

Industrial safety helmets

 

BS EN 405:2001+A1:2009

Respiratory protective devices. Valved filtering half masks to protect against gases or gases and particles.

 

BS EN 420:2003+A1:2009

Protective gloves. General requirements and test methods

 

BS EN 430:1994

Resilient floor coverings. Determination of mass per unit area

 

BS EN ISO 20471:2013

High visibility clothing. Test methods and requirements

 

BS EN 511:2006

Protective gloves against cold

 

BS EN 533:1997

Protective clothing. Protection against heat and flame. Limited flame spread materials and material assemblies

 

BS EN 795:2012

Personal fall protection equipment. Anchor devices

 

BS EN 812:2012

Industrial bump caps

 

BS EN ISO 10819:2013

Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand

 

BS EN ISO 11611:2015

Protective clothing for use in welding and allied processes

 

BS EN ISO 13688:2013

Protective clothing. General requirements

 

BS EN ISO 14116:2015

Protective clothing. Protection against flame. Limited flame spread materials, material assemblies and clothing

 

BS EN 61482-1-2:2014

Live working. Protective clothing against the thermal hazards of an electric arc. Test methods. Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test)

круглосуточные займы онлайн